eML Processor Modulator (PM)

agile input channel, fixed output channel television channel processor

SAW filtered

synthesized visual and aural carriers, synthesized frequency offsets

preserves stereo encoding on the input channel, if present

high carrier-to-noise ratio

low spurious and low-out-of-band noise

very compact, 12 processors in 1U (1.75") chassis

other module types e.g. MM, SM can be accommodated in the same chassis
powered by redundant MPS-9 or non-redundant SPS-9
ordering information: PM-xxx where xxx is the output channel number
Download the eML Quick Reference or the complete eML Manual
Specifications

RF
Input Channels
cont...
Input Level Range
Input Channel Selection
Output Channels

Output Level
Spurious Output (55-850 MHz)
A/V Carrier Ratio
Frequency Stability, Visual Carrier
Aural/Visual Frequency Accuracy
Frequency Offsets
Carrier to Noise Ratio
Broadband Noise
Phase Noise
Connector, Input and Output

RF
Agile, 55 to 800 Mhz (VHF Ch 2-13,
UHF Ch 14-69, CATV Ch 2-125)
-10 to +25 dBmV
front panel selectable
Channel 2-133 (55 to 850 MHz)
+30dBmV to +50dBmV, adjustable
-60dBc (at +45dBmV output)
-12 to -20 dB, front-panel adjustable
+/-5kHz, (0 to 40 degC)
+/- 500 Hz (+10 to +40 degC)
synthesized, factory set, order as required
> 62dBc (4 MHz bandwidth)
< -90dBc (4 MHz bandwidth)
< -90dBc/Hz @ 10kHz offset
F-type female

General
DC Power Input
Dimensions
Mounting
Cooling
Operating Temperature
 
General
+9.2VDC, 450mA
11.3"x1.3"x1.75"
12 eML modules in 1U eML chassis
convection
0 to 50 degrees C (32 to 122 degrees F)